Repository logo
  • English
  • Català
  • Čeština
  • Deutsch
  • Español
  • Français
  • Gàidhlig
  • Latviešu
  • Magyar
  • Nederlands
  • Polski
  • Português
  • Português do Brasil
  • Suomi
  • Svenska
  • Türkçe
  • Қазақ
  • বাংলা
  • हिंदी
  • Ελληνικά
  • Yкраї́нська
  • Log In
    or
    Have you forgotten your password?
Repository logo
  • Communities & Collections
  • All of UTM Open Science
  • English
  • Català
  • Čeština
  • Deutsch
  • Español
  • Français
  • Gàidhlig
  • Latviešu
  • Magyar
  • Nederlands
  • Polski
  • Português
  • Português do Brasil
  • Suomi
  • Svenska
  • Türkçe
  • Қазақ
  • বাংলা
  • हिंदी
  • Ελληνικά
  • Yкраї́нська
  • Log In
    or
    Have you forgotten your password?
  1. Home
  2. Browse by Author

Browsing by Author "Johari, Anwar"

Now showing 1 - 1 of 1
Results Per Page
Sort Options
  • Loading...
    Thumbnail Image
    Item
    Design and operating parameters of a fluidized bed for the combustion of municipal solid waste using standpipes air distributors
    (Universiti Teknologi Malaysia, 2009) Johari, Anwar
    Hydrodynamic studies and combustion of simulated and actual municipal solid waste were carried out in a fluidized bed system. A wide range of parameters was investigated in hydrodynamic study after which the optimum parameters were implemented in the combustion studies. A newly fabricated standpipes air distributor (primary air inlet) was designed based on findings of the optimum orifice diameter, orifice distance and distance between pipes. Orifice diameter, orifice distance and distance between pipes of 3 mm, 10 mm and 70 mm were used in the hydrodynamic studies of circular and rectangular columns (CHS and RHS). The operating parameters investigated in the CHS and RHS included the effect of sand sizes and aspect ratios on the fluidization profile. Standpipes air distributors having the same orifice diameter and distance but with a wider pipe distance of 200 mm were used in the hydrodynamic studies of a bigger rectangular (big scale) column. Different air flow strategies were implemented to ensure good mixing between sand and samples and to investigate the penetration of the incombustibles into the sand bed. Parameters studied in the combustion of municipal solid waste included the effect of fluidizing velocity and air factor on the combustion profile in the bed as well as the freeboard region with standpipe air distributor design and dimension established from the hydrodynamic studies of a bigger scale rectangular column. Findings from the CHS and RHS showed that sand particles with mean size of 0.34 mm performed good fluidization profile compared to other coarser sand sizes. The ratio of the bed height over diameter of column (Dc) for good fluidization was determined at H = Dc for the circular column whereas the ratio of the bed height (H) over the length of column was observed at H
  • Cookie settings
  • Privacy policy
  • End User Agreement
  • Send Feedback